"""
图片复杂度识别模块

使用智谱 GLM-4V 视觉模型分析客户发来的图片，
判断处理难度，为客服AI提供报价依据。

复杂度等级（越平整越便宜）：
  simple  → 10-15元（画面平整、无小字、无人脸、无阴影）
  normal  → 15-20元（一般复杂度）
  complex → 20-25元（有褶皱/小字/人脸/阴影）
  hard    → 25-30元（非常复杂）

报价维度：平整度、含文字（小字加价）、含人脸、阴影。
同一 URL 5 分钟内复用缓存，节省 API 调用。
"""
import os
import asyncio
import base64
import time
from typing import Optional, Tuple
from openai import AsyncOpenAI
from dotenv import load_dotenv
from PIL import Image
import aiohttp

load_dotenv()


ANALYSIS_PROMPT = """你是一个电商图片处理评估专家，同时也是 Gemini 图像生成提示词专家。
请仔细分析这张图片，输出以下字段，每行一个，不要多余内容：

敏感内容: <yes|no>
平整度: <flat|mild|rough>
含文字: <yes|no>
含人脸: <yes|no>
阴影: <yes|no>
复杂度: <simple|normal|complex|hard>
原因: <15字以内，说明复杂度判断依据>
主体: <图片核心内容，如：印花图案/logo/人物/产品/老照片/风景/文字/其他>
类型: <处理类型，如：印花提取/高清修复/去背景/老照片修复/logo提取/人像修复/其他>
质量: <原图质量，如：清晰/轻微模糊/严重模糊/低分辨率/截图/扫描件>
可做: <yes|partial|no>
风险: <none|low|high>
透视: <no|mild|strong>
比例: <从以下选一个最合适的：1:1 / 9:16 / 16:9 / 3:4 / 4:3 / 3:2 / 2:3 / 5:4 / 4:5>
提示词: <为 Gemini 写处理指令，中文，60字以内，说明要做什么、保留什么、去掉什么>
备注: <给客服AI的特别提示，没有则填无>

判断规则：

【报价核心：越平整越便宜】
- 平整度 flat：画面平整、无褶皱、无透视 → 便宜
- 平整度 mild：轻微褶皱/透视 → 中等
- 平整度 rough：有褶皱/透视/曲面 → 贵
- 含文字：大字没关系不加价；小字需精细保留/清晰化 → 加价（含文字填 yes 仅指有小字的情况）
- 含人脸 yes：有人脸 → 加价
- 阴影 yes：有明显阴影需处理 → 加价
综合以上因素，越平整、无小字、无人脸、无阴影 → 越便宜（simple）

【含文字】
- yes：含小字需精细保留/清晰化（小字难处理 → 加价）
- no：无文字，或仅有大字（大字没关系 → 不加价）

【文字数量加价规则】
- none：无文字，不加价
- 少量 (1-10 字)：+5 元
- 中量 (11-50 字)：+10-15 元
- 大量 (51-200 字)：+20-30 元
- 极多 (200 字以上)：+30-50 元

【文字分层需求】
- yes：客户要求可编辑分层文件（PSD 等） → 基础价格 x2 或 +50 元起
- no：普通图片处理 → 正常价格

【文字分层 + 大量文字】
- 如果 文字数量=大量/极多 且 文字分层需求=yes → 总价可达 60-80 元

【含人脸】
- yes：图中有真实人物面孔（人像照/集体照/证件照/老照片等）
- no：无人脸或人脸极小不影响主体

【风险评估 - 重要！】
- none：印花/图案/logo/风景/产品，AI处理效果稳定，可直接报价接单
- low：有人脸但清晰度尚可，AI修复后人脸相似度70-90%，可以接单但要说明风险
- high：以下任一情况 → 严重模糊的人脸照片/老照片人像/需要打印/客户问能否找回原图
  high情况下，可做改为partial，备注写明风险话术，谨慎接单

【敏感内容检测 - 必须严格判断！】
- yes：含以下任一内容 → 色情/黄色/擦边/裸露/性暗示/大尺度/涉政/暴力/血腥/违禁品
  敏感内容=yes 时，可做必须填 no，直接拒绝不接单
- no：无上述敏感内容，可以正常接单处理

【可做判断 - 决定是否接单】
- yes：效果有把握，可以接单处理
- partial：能处理但有明显限制（人脸变形风险/分辨率极低/严重损坏）→ 可以接单但要说明风险
- no：无法接单（纯黑/纯白/完全损坏/找原始 RAW 文件/敏感内容/违法内容）

【敏感内容】优先判断，若为 yes 则 可做 必填 no
- yes：图片含色情/黄色/擦边/裸露/性暗示/大尺度等违规内容
- no：无上述敏感内容

【可做判断】
- yes：效果有把握，可直接处理
- partial：能处理但有明显限制（人脸变形风险/分辨率极低/严重损坏）
- no：无法处理（纯黑/纯白/完全损坏/找原始RAW文件/敏感内容）

【风险话术模板（备注字段）】
- 含人脸+需打印：AI修复后人脸可能有轻微变化，建议先看效果确认再打印
- 严重模糊人脸：这张模糊程度较高，修复后清晰了但人脸可能跟原来有差异
- 找原图：找不到原始文件，只能对现有图片做高清修复处理
- 完全损坏：这张无法处理

【透视判断】
- no：正面拍摄，无明显变形
- mild：轻微透视（衣服悬挂/桌面小角度斜拍）
- strong：严重透视（俯拍/贴墙/大角度倾斜）

【比例选择】
- 印花/图案/logo/正方形 -> 1:1
- 竖屏壁纸/短视频封面 -> 9:16
- 宽屏/横版视频 -> 16:9
- 移动广告/Instagram竖图 -> 4:5
- 竖向人像/海报/证件照 -> 3:4
- 竖向相机照片 -> 2:3
- 接近正方形产品图 -> 5:4
- 横向标准图/风景 -> 4:3
- 横向相机照片/产品实拍 -> 3:2

示例1（印花，无风险）：
敏感内容: no
平整度: mild
含文字: no
含人脸: no
阴影: no
复杂度: complex
原因: 印花细节密集颜色层次多
主体: 印花图案
类型: 印花提取
质量: 轻微模糊
可做: yes
风险: none
透视: mild
比例: 1:1
提示词: 提取衣物印花图案，去除褶皱和背景杂色，补全缺失部分，保持颜色细节100%还原，输出干净平面印花图
备注: 无

示例2（人像老照片，要打印）：
敏感内容: no
平整度: flat
含文字: no
含人脸: yes
阴影: no
复杂度: hard
原因: 严重模糊人脸细节丢失
主体: 人物照片
类型: 人像修复
质量: 严重模糊
可做: partial
风险: high
透视: no
比例: 3:4
提示词: 对模糊人像进行高清修复，增强细节，保持人物特征不变
备注: AI修复后人脸可能有轻微变化，建议先看效果确认满意再用于打印

示例3（平整印花，最便宜）：
敏感内容: no
平整度: flat
含文字: no
含人脸: no
阴影: no
复杂度: simple
原因: 画面平整无褶皱无文字无人脸
主体: 印花图案
类型: 印花提取
质量: 清晰
可做: yes
风险: none
透视: no
比例: 1:1
提示词: 提取印花图案，去除背景，输出干净平面图
备注: 无"""


class ImageAnalyzer:
    """图片复杂度分析器"""

    # 同一 URL 5 分钟内复用结果，节省 API 调用
    _CACHE_TTL_SECONDS = 300
    _analysis_cache: dict = {}  # url -> (result_dict, timestamp)

    PRICE_MAP = {
        "simple":  (10, 15, "画面简单干净"),
        "normal":  (15, 20, "一般复杂度"),
        "complex": (20, 25, "细节偏多"),
        "hard":    (25, 30, "非常复杂"),
    }
    # 注意：含文字很多时，不能报 simple/normal 的低价，必须 complex 起步

    def __init__(self):
        self.api_key = os.getenv("OPENAI_API_KEY")
        self.base_url = os.getenv("OPENAI_BASE_URL", "https://open.bigmodel.cn/api/paas/v4")
        # 视觉模型，智谱 GLM-4V 系列
        self.vision_model = os.getenv("VISION_MODEL", "glm-4v-flash")

    def _is_url(self, image_path: str) -> bool:
        return image_path.startswith("http://") or image_path.startswith("https://")

    def _load_image_base64(self, image_path: str) -> Optional[str]:
        """本地图片转 base64"""
        try:
            with open(image_path, "rb") as f:
                return base64.b64encode(f.read()).decode("utf-8")
        except Exception as e:
            print(f"[ImageAnalyzer] 读取图片失败: {e}")
            return None

    async def _get_image_size(self, image_path: str) -> Tuple[int, int]:
        """获取图片像素尺寸 (width, height)，URL 或 本地路径"""
        try:
            if self._is_url(image_path):
                timeout = aiohttp.ClientTimeout(total=10)
                async with aiohttp.ClientSession(timeout=timeout) as session:
                    async with session.get(image_path) as resp:
                        if resp.status != 200:
                            return (0, 0)
                        data = await resp.read()
                from io import BytesIO
                with Image.open(BytesIO(data)) as img:
                    w, h = img.size
                    return (int(w), int(h))
            else:
                with Image.open(image_path) as img:
                    w, h = img.size
                    return (int(w), int(h))
        except Exception as e:
            print(f"[ImageAnalyzer] 获取尺寸失败: {e}")
            return (0, 0)

    # 最短等待时间（秒）：即使AI极快返回，也等这么久，看起来像真人在找
    MIN_WAIT_SECONDS = 4

    DENSE_TEXT_SUBJECT_KEYWORDS = (
        "宣传栏", "公告栏", "展板", "海报墙", "通知栏", "知识栏", "制度牌", "公示栏", "墙报", "密密麻麻",
        "宣传海报", "知识海报", "科普海报", "防灾减灾", "宣传板", "宣传页",
        "表格", "检索表", "配伍表", "药物配伍", "课程表", "流程表", "说明表", "数据表",
        "word wall", "poster wall", "bulletin board",
    )
    MANY_FACES_SUBJECT_KEYWORDS = (
        "多人", "多人脸", "人群", "群像", "合照", "集体照", "全家福", "毕业照", "婚礼合影", "大合照",
        "crowd", "group photo", "many faces",
    )
    FORBIDDEN_CONTENT_KEYWORDS = (
        # 党政/涉政
        "党政", "涉政", "政治人物", "领导人", "国旗", "国徽", "党徽", "党旗", "时政宣传",
        # 黄暴血腥
        "黄色", "擦边", "裸露", "色情", "性暗示", "暴力", "凶杀", "打斗", "枪击", "血腥", "尸体", "虐待",
        # 英文兜底
        "political", "government propaganda", "nsfw", "porn", "nude", "violence", "bloody", "gore",
    )

    async def analyze(self, image_path: str) -> dict:
        """
        异步分析图片复杂度（使用火山引擎 /responses 接口）。
        实际等待时间 = max(视觉AI响应时间, MIN_WAIT_SECONDS)

        Args:
            image_path: 图片URL 或 本地路径

        Returns:
            {
                "complexity": "simple|normal|complex|hard",
                "reason": "原因描述",
                "price_min": 最低报价,
                "price_max": 最高报价,
                "price_suggest": 建议报价,
                "elapsed": 实际耗时秒数,
                "success": True/False
            }
        """
        if not self.api_key:
            await asyncio.sleep(self.MIN_WAIT_SECONDS)
            return self._fallback("未配置 API Key")

        # 缓存：仅对 URL 生效，本地路径不缓存
        cache_key = image_path if self._is_url(image_path) else None
        if cache_key:
            now = time.monotonic()
            cached = self._analysis_cache.get(cache_key)
            if cached:
                result, cached_at = cached
                if now - cached_at < self._CACHE_TTL_SECONDS:
                    print(f"[ImageAnalyzer] 缓存命中 | URL 已分析过，跳过 API 调用")
                    result = dict(result)
                    result["elapsed"] = 0
                    return result
                else:
                    del self._analysis_cache[cache_key]

        start = time.monotonic()

        try:
            # 构建图片内容
            if self._is_url(image_path):
                image_item = {
                    "type": "input_image",
                    "image_url": image_path
                }
            else:
                b64 = self._load_image_base64(image_path)
                if not b64:
                    await asyncio.sleep(self.MIN_WAIT_SECONDS)
                    return self._fallback("图片读取失败")
                image_item = {
                    "type": "input_image",
                    "image_url": f"data:image/jpeg;base64,{b64}"
                }

            # 使用火山引擎官方 SDK（AsyncOpenAI + /responses 接口）
            client = AsyncOpenAI(
                base_url=self.base_url,
                api_key=self.api_key,
            )

            response = await client.responses.create(
                model=self.vision_model,
                input=[
                    {
                        "role": "user",
                        "content": [
                            image_item,
                            {
                                "type": "input_text",
                                "text": ANALYSIS_PROMPT
                            }
                        ]
                    }
                ]
            )

            content = response.output_text

            elapsed = time.monotonic() - start
            print(f"[ImageAnalyzer] 视觉AI响应耗时: {elapsed:.1f}s")

            await self._wait_remaining(elapsed)

            result = self._parse_result(content)
            result["elapsed"] = elapsed

            # 计算尺寸与类型加价
            try:
                w, h = await self._get_image_size(image_path)
                mp = round((w * h) / 1_000_000, 2) if w and h else 0.0
                result["width"] = w
                result["height"] = h
                result["megapixels"] = mp

                # 归一化类型
                subj = (result.get("subject") or "").lower()
                ptype = (result.get("proc_type") or "").lower()
                ratio = result.get("aspect_ratio") or "1:1"
                category = "general"
                # 初步判断
                if ("壁纸" in subj) or ("wallpaper" in subj) or ratio in ("9:16", "16:9"):
                    category = "wallpaper"
                elif ("衣" in subj) or ("服" in subj) or ("印花" in subj) or ("fabric" in subj) or ("cloth" in subj) or ("服装" in subj) or ("印花" in ptype):
                    category = "clothing"
                elif ("logo" in subj) or ("logo" in ptype):
                    category = "logo"
                elif ("海报" in subj) or ("poster" in subj):
                    category = "poster"
                elif ("人像" in subj) or ("人物" in subj) or ("portrait" in subj):
                    category = "portrait"
                elif ("产品" in subj) or ("product" in subj):
                    category = "product"
                elif ("老照片" in subj) or ("old photo" in subj):
                    category = "old_photo"
                # 可印花/印刷物体扩展
                keywords = subj + " " + ptype
                if any(k in keywords for k in ["装饰画", "挂画", "油画", "canvas", "painting"]):
                    category = "decor_painting"
                elif any(k in keywords for k in ["窗帘", "curtain"]):
                    category = "curtain"
                elif any(k in keywords for k in ["地垫", "脚垫", "地毯", "垫", "mat", "rug"]):
                    category = "floor_mat"
                elif any(k in keywords for k in ["广告牌", "喷绘", "展架", "灯箱", "banner", "billboard"]):
                    category = "billboard"
                elif any(k in keywords for k in ["毯子", "毛毯", "blanket"]):
                    category = "blanket"
                elif any(k in keywords for k in ["桌布", "台布", "tablecloth", "桌旗"]):
                    category = "tablecloth"
                elif any(k in keywords for k in ["书本", "书籍", "封面", "book", "book cover"]):
                    category = "book"
                elif any(k in keywords for k in ["鼠标垫", "mouse pad", "mousepad"]):
                    category = "mouse_pad"
                elif any(k in keywords for k in ["头像", "个人头像", "个人照", "profile", "avatar"]):
                    category = "avatar"
                result["category"] = category

                surcharge = 0
                size_note = ""
                # 按类别设定尺寸要求与加价阈值（单位：百万像素）
                if category == "wallpaper":
                    if h and h < 1920:
                        size_note = "壁纸高度低于1920px，清晰度可能不足"
                    if mp > 8:
                        surcharge = 10
                    elif mp > 3:
                        surcharge = 5
                elif category == "clothing":
                    if (w and w < 1024) or (h and h < 1024):
                        size_note = "印花源图边长低于1024px，放大后细节可能不足"
                    if mp > 6:
                        surcharge = 10
                    elif mp > 2:
                        surcharge = 5
                elif category in ("poster", "portrait", "product"):
                    if mp > 12:
                        surcharge = 10
                    elif mp > 6:
                        surcharge = 5
                elif category == "logo":
                    if mp > 6:
                        surcharge = 5
                elif category == "decor_painting":
                    if (w and w < 1500) or (h and h < 1500):
                        size_note = "装饰画边长低于1500px，打印放大可能不够清晰"
                    if mp > 12:
                        surcharge = 10
                    elif mp > 6:
                        surcharge = 5
                elif category == "curtain":
                    if (w and w < 1500):
                        size_note = "窗帘宽度低于1500px，印花放大可能不够清晰"
                    if mp > 16:
                        surcharge = 10
                    elif mp > 8:
                        surcharge = 5
                elif category == "floor_mat":
                    if mp > 12:
                        surcharge = 10
                    elif mp > 6:
                        surcharge = 5
                elif category == "billboard":
                    if (w and w < 2000) or (h and h < 1000):
                        size_note = "广告牌尺寸较小，建议更高分辨率以保证喷绘清晰"
                    if mp > 20:
                        surcharge = 10
                    elif mp > 10:
                        surcharge = 5
                elif category == "blanket":
                    if mp > 16:
                        surcharge = 10
                    elif mp > 8:
                        surcharge = 5
                elif category == "tablecloth":
                    if mp > 12:
                        surcharge = 10
                    elif mp > 6:
                        surcharge = 5
                elif category == "book":
                    if (w and w < 800):
                        size_note = "书本封面宽度低于800px，印刷细节可能不足"
                    if mp > 6:
                        surcharge = 5
                elif category == "mouse_pad":
                    if (w and w < 1000):
                        size_note = "鼠标垫源图宽度低于1000px，细节可能不足"
                    if mp > 4:
                        surcharge = 5
                elif category == "avatar":
                    if (w and w < 800) or (h and h < 800):
                        size_note = "头像边长低于800px，清晰度可能不足"
                    if mp > 6:
                        surcharge = 5
                else:
                    if mp > 8:
                        surcharge = 10
                    elif mp > 4:
                        surcharge = 5

                # 应用加价，保持5的整数倍与 10-30 区间
                base = result.get("price_suggest", 20)
                adjusted = base + surcharge
                adjusted = max(10, min(30, adjusted))
                adjusted = round(adjusted / 5) * 5
                # 同步范围
                result["price_suggest"] = adjusted
                result["price_max"] = max(result["price_max"], adjusted)
                result["size_surcharge"] = surcharge
                result["size_note"] = size_note
            except Exception as e:
                print(f"[ImageAnalyzer] 尺寸与类型加价计算失败: {e}")

            # 写入缓存
            if cache_key:
                self._analysis_cache[cache_key] = (dict(result), time.monotonic())
                # 简单清理：缓存超过 50 条时删最旧的
                if len(self._analysis_cache) > 50:
                    oldest = min(self._analysis_cache.items(), key=lambda x: x[1][1])
                    del self._analysis_cache[oldest[0]]

            return result

        except asyncio.TimeoutError:
            elapsed = time.monotonic() - start
            print(f"[ImageAnalyzer] 请求超时 ({elapsed:.1f}s)")
            return self._fallback("请求超时")
        except Exception as e:
            elapsed = time.monotonic() - start
            print(f"[ImageAnalyzer] 分析失败: {e}")
            await self._wait_remaining(elapsed)
            return self._fallback(str(e))

    async def _wait_remaining(self, elapsed: float):
        """补足最短等待时间"""
        remaining = self.MIN_WAIT_SECONDS - elapsed
        if remaining > 0:
            await asyncio.sleep(remaining)

    def _parse_line(self, content: str, *keys: str) -> str:
        """从多行文本中提取指定字段值，支持中英文冒号"""
        for line in content.strip().split("\n"):
            line = line.strip()
            for key in keys:
                if line.startswith(key):
                    return line.split(":", 1)[-1].split("：", 1)[-1].strip()
        return ""

    def _parse_result(self, content: str) -> dict:
        """解析模型返回的结果"""
        p = self._parse_line

        # 复杂度
        complexity_raw = p(content, "复杂度:", "复杂度：").lower()
        complexity = complexity_raw if complexity_raw in self.PRICE_MAP else "normal"

        sensitive    = p(content, "敏感内容:", "敏感内容：").lower().strip()
        flatness    = p(content, "平整度:", "平整度：").lower().strip()  # flat|mild|rough
        has_text    = p(content, "含文字:", "含文字：").lower().strip()
        text_amount = p(content, "文字数量:", "文字数量：").strip()
        text_layer_need = p(content, "文字分层需求:", "文字分层需求：").lower().strip()
        has_face    = p(content, "含人脸:", "含人脸：").lower().strip()
        has_shadow  = p(content, "阴影:", "阴影：").lower().strip()
        reason      = p(content, "原因:", "原因：")
        subject     = p(content, "主体:", "主体：")
        proc_type   = p(content, "类型:", "类型：")
        quality     = p(content, "质量:", "质量：")
        feasibility  = p(content, "可做:", "可做：").lower()
        risk         = p(content, "风险:", "风险：").lower().strip()
        perspective  = p(content, "透视:", "透视：").lower().strip()
        aspect_ratio = p(content, "比例:", "比例：").strip()
        gemini_prompt= p(content, "提示词:", "提示词：")
        note         = p(content, "备注:", "备注：")

        if has_face not in ("yes", "no"):
            has_face = "no"
        valid_text_amounts = {"none", "少量 (1-10 字)", "中量 (11-50 字)", "大量 (51-200 字)", "极多 (200 字以上)"}
        if text_amount not in valid_text_amounts:
            text_amount = "none"
        if text_layer_need not in ("yes", "no"):
            text_layer_need = "no"
        if risk not in ("none", "low", "high"):
            risk = "none"
        if perspective not in ("no", "mild", "strong"):
            perspective = "no"

        scene_text = ((subject or "") + " " + (proc_type or "") + " " + (reason or "") + " " + (note or "")).lower()

        # 识别“密集文字场景”关键词（中文 + 英文兜底）
        dense_text_scene = any(
            kw in scene_text
            for kw in self.DENSE_TEXT_SUBJECT_KEYWORDS
        )
        dense_text_hint = any(
            kw in scene_text
            for kw in ("密集文字", "大量文字", "小字", "多板块", "细字")
        )

        # 校验比例合法性
        valid_ratios = {"1:1", "9:16", "16:9", "3:4", "4:3", "3:2", "2:3", "5:4", "4:5"}
        if aspect_ratio not in valid_ratios:
            aspect_ratio = "1:1"  # 默认正方形

        price_min, price_max, default_reason = self.PRICE_MAP[complexity]
        if not reason:
            reason = default_reason
        if feasibility not in ("yes", "partial", "no"):
            feasibility = "yes"


        # 【重要】含文字很多时，不能低价，必须 complex 起步（20 元以上）
        # 有文字跟没文字是两个价格
        if has_text == "yes":
            if complexity == "simple":
                # 简单但含文字 → 提升到 normal 价格
                price_min, price_max, _ = self.PRICE_MAP["normal"]
                reason = "含文字，需精细处理"
            elif complexity == "normal":
                # normal 含文字 → 提升到 complex 价格
                price_min, price_max, _ = self.PRICE_MAP["complex"]
                reason = "含文字，需精细处理"
            # complex/hard 保持原价，已经够高
        # 建议报价：complex/hard 取固定值，simple/normal 取中间，且必须为5的整数倍
        raw = price_max if complexity in ("complex", "hard") else (price_min + price_max) // 2
        price_suggest = round(raw / 5) * 5

        # 【文字数量加价】
        text_surcharge = 0
        if text_amount == "少量 (1-10 字)":
            text_surcharge = 5
            reason += " | 含少量文字"
        elif text_amount == "中量 (11-50 字)":
            text_surcharge = 15
            reason += " | 含中量文字"
        elif text_amount == "大量 (51-200 字)":
            text_surcharge = 30
            reason += " | 含大量文字"
        elif text_amount == "极多 (200 字以上)":
            text_surcharge = 50
            reason += " | 含极多文字"

        # 【文字分层需求加价】
        layer_surcharge = 0
        if text_layer_need == "yes":
            if text_surcharge > 0:
                # 有文字且需要分层 → 价格 x2 或 +50 元
                layer_surcharge = max(50, price_suggest)
                reason += " | 需要文字分层"
            else:
                # 无文字但需要分层 → +30 元
                layer_surcharge = 30
                reason += " | 需要分层文件"

        # 加上文字加价
        price_suggest += text_surcharge + layer_surcharge

        # 【文字分层 + 大量文字】特殊处理 → 60-80 元
        if text_amount in ["大量 (51-200 字)", "极多 (200 字以上)"] and text_layer_need == "yes":
            if price_suggest < 60:
                price_suggest = 60
            elif price_suggest > 80:
                price_suggest = 80
            reason += " | 大量文字分层"

        # 硬规则1：文字很多（>100）且密密麻麻不接单
        text_gt_100 = text_amount in ["大量 (51-200 字)", "极多 (200 字以上)"]
        dense_text_hard_reject = text_gt_100 or dense_text_scene or (has_text == "yes" and dense_text_hint)
        if dense_text_hard_reject:
            feasibility = "no"
            risk = "high"
            note = "文字内容过于密集（如宣传栏/公告栏），暂不接单处理"
            reason = (reason or "文字密集") + " | 密集文字场景不接单"
            price_suggest = 0

        # 硬规则2：多人脸不接；1-2 人脸可做
        many_faces_scene = any(k in scene_text for k in self.MANY_FACES_SUBJECT_KEYWORDS)
        if has_face == "yes" and many_faces_scene:
            feasibility = "no"
            risk = "high"
            note = "多人脸/群像场景处理风险高，暂不接单"
            reason = (reason or "多人脸") + " | 多人脸场景不接单"
            price_suggest = 0

        # 硬规则3：党政/涉黄/暴力/血腥内容不接单
        forbidden_scene = any(k in scene_text for k in self.FORBIDDEN_CONTENT_KEYWORDS)
        sensitive_hit = str(sensitive or "").strip().lower() in ("yes", "true", "1", "是")
        if forbidden_scene or sensitive_hit:
            feasibility = "no"
            risk = "high"
            note = "含党政/涉黄/暴力/血腥等敏感内容，不接单"
            reason = (reason or "敏感内容") + " | 敏感内容不接单"
            price_suggest = 0

        # 确保是 5 的倍数
        price_suggest = round(price_suggest / 5) * 5

        risk_label = {"none": "无风险", "low": "低风险", "high": "高风险"}.get(risk, "")
        sens_tag = " | 敏感:是" if sensitive == "yes" else ""
        print(f"[ImageAnalyzer] 识别结果: {complexity} | {reason} | 建议报价: {price_suggest}元{sens_tag}")
        print(f"[ImageAnalyzer] 主体: {subject} | 类型: {proc_type} | 质量: {quality} | 平整度: {flatness} | 含文字: {has_text} | 含人脸: {has_face} | 阴影: {has_shadow} | 风险: {risk_label} | 透视: {perspective} | 比例: {aspect_ratio} | 可做: {feasibility}")
        if gemini_prompt:
            print(f"[ImageAnalyzer] Gemini提示词: {gemini_prompt}")
        if note and note not in ("无", ""):
            print(f"[ImageAnalyzer] 备注: {note}")

        return {
            "complexity":    complexity,
            "reason":        reason,
            "subject":       subject,
            "proc_type":     proc_type,
            "quality":       quality,
            "flatness":      flatness if flatness in ("flat", "mild", "rough") else "",
            "has_text":      has_text if has_text in ("yes", "no") else "no",
            "text_amount":    text_amount,
            "text_layer_need": text_layer_need,
            "text_surcharge": text_surcharge,
            "layer_surcharge": layer_surcharge,
            "has_face":      has_face,       # yes / no
            "has_shadow":    has_shadow if has_shadow in ("yes", "no") else "no",
            "risk":          risk,           # none / low / high
            "feasibility":   feasibility,
            "perspective":   perspective,
            "aspect_ratio":  aspect_ratio,
            "gemini_prompt": gemini_prompt,
            "note":          note,
            "price_min":     price_min,
            "price_max":     price_max,
            "price_suggest": price_suggest,
            "success":       True
        }

    def _fallback(self, reason: str) -> dict:
        """识别失败时的默认结果（返回 normal，让人工判断）"""
        print(f"[ImageAnalyzer] 识别失败，使用默认值: {reason}")
        text_amount = "none"
        text_layer_need = "no"
        text_surcharge = 0
        layer_surcharge = 0
        return {
            "complexity":    "normal",
            "reason":        reason,
            "subject":       "",
            "proc_type":     "",
            "quality":       "",
            "flatness":      "",
            "has_text":      "no",
            "text_amount":    text_amount,
            "text_layer_need": text_layer_need,
            "text_surcharge": text_surcharge,
            "layer_surcharge": layer_surcharge,
            "has_face":      "no",
            "has_shadow":    "no",
            "risk":          "none",
            "feasibility":   "yes",
            "perspective":   "no",
            "aspect_ratio":  "1:1",
            "gemini_prompt": "",
            "note":          "",
            "price_min":     20,
            "price_max":     30,
            "price_suggest": 25,
            "success":       False
        }


# 全局实例
image_analyzer = ImageAnalyzer()